Tuesday, 10 November 2009

note to self

This note to self isn’t really needed, anymore, having just had to make the change for 27 different figures in 19 CorelDraw documents; I think I will remember forever. However, sometimes it comforts others to hear about my silly mistakes; therefore I’ll say it here publicly:

Photos of thin sections are taken in either crossed-polarized or plane-polarized light. Just because plane polarized light photos tend to be less colourful than crossed-polarized light photos does not make them “plain”.

That’s it. You may now resume your other blog reading. Hope my lesson brought a smile to your face.


Making choices

I have finally received the examiner’s reports from my thesis (submitted back in June). Much to my delight the suggested corrections they have requested are minor, so it shouldn’t be too much longer until the degree is granted.

There was one statement in the examiner’s report which raised my eyebrows a bit. One of the two examiners expressed “surprise” that I made no use of Thermocalc “pseudosections”, which said examiner has found to give consistent results for a variety of compositions. He is correct; my thesis did not make use of that particular program for that task. Instead I used the program Perple_X, to which I was introduced first. I did consider also learning Thermocalc, and Theriak-Domino as well, since each program approaches the task slightly differently. However, it was recommended to me that rather than learning several different programs for the same sort of tasks that I instead focus on one and use the time not spent learning the mechanics of the other programs generating additional data for other aspects of the thesis. Around this same time I read a paper* by an author who did take the time to use those three different programs to model the same samples, and achieved similar, though not identical, results with each. The advice sounding reasonable to me, and the paper further convinced me that since different tools will give similar results that the important thing was to simply choose one of them. I can fully understand having a preference for one program over the other when doing such modeling and creating such diagrams, but never will I be surprised if a student working on their PhD chooses to go with only one program to accomplish a specific type of task. Today’s students are given a limited amount of time to complete their degree and failure to submit the thesis by the University imposed deadline results in loss of funding/support. Given such constraints it is not possible to use every program available, without sacrificing other sections of the research and some choices must be made.

*Hoschek, G., 2004. Comparison of calculated P-T pseudosections for a kyanite eclogite from the Tauern Window, Eastern Alps, Austria. European Journal of Mineralogy, 16(1), 59-72.

Tuesday, 3 November 2009

first experiment photos

Yesterday I wrote about the effect of water saturation on the size of the crystals grown in my experiments. Today I've got photographs:



These are back-scatter electron images, which means that the brighter the pixel, the heavier elements present at that point (and the darker the pixel, the lighter the element). The bright ring-like objects are rims of iron-rich garnet growing on the seeds of Mg-garnet that was present in the powder before running the experiment. The bright dots of the same tone of brightness as the rings are new Fe-rich garnets growing in the matrix. As you can see, there is a pronounced difference in quantity and size between the two samples. Note the difference in the scale bars between the two photos.

Monday, 2 November 2009

water is important for growth, even for minerals

One of the joys about the learning to run experiments process is that one gets to learn the results of both intended and unintended phenomena. In my experiments the intention is to seal powder of known composition into gold capsules along with a sufficient H2O and graphite to ensure that the chemical reactions which take place when we elevate the pressure and temperature (to simulate what happens to rocks buried at great depth) take place in “water-saturated” conditions (which is to say there is enough water available for the growth of minerals which require water as part of their chemical formula, such as the micas). However, learning to weld the capsules is a difficult process (I’ve got a draft post on that topic just waiting for me to get photos that actually display the features I want them to show).

As a result of my welding trials and tribulations I’ve had mixed success in the “sealing” part of the above paragraph. Despite the issues with my first attempts at sealing, we ran my first experiment nonetheless, giving two samples a week and a half at elevated pressure/temperature (in this case 650 C and 25 kbars). Once they were “cooked” we had the gold capsules mounted into small disks of epoxy, then carefully polished the disks until the insides of the capsules were exposed. During the polishing stage we received our first confirmation that they had not achieved the same level of “sealed”. Apparently when properly sealed the presence of water inside the capsules ensures that the pore space in between the grains of powder are occupied, and as a result even the high pressures to which we subject them aren’t enough for the new minerals to properly interlock when they grow. As a result, while there are new crystals present, the texture isn’t very rock-like, and when polishing it is easy to accidentally remove clumps of the sample itself. This is the texture we were anticipating, and, for one of the samples run in the first experiment, this is exactly what happened. In these cases we polish only enough to just expose the inside of the capsule, then add more epoxy, letting it soak down into those pore spaces and let it dry before completing the polishing process without so much risk in losing what we are trying to polish.

However, in the other of the two samples run in the first experiment I must not have done the final welding properly, because the contents of the capsule were much harder, and held together better, meaning that the pore space was not held open with fluid when the minerals were growing. This was obvious during the polishing process, so I was able to go quite a bit deeper into the capsule (remember these are only 2 mm in diameter and about 5 mm long so “deeper” is only a relative term) before needing to add the additional epoxy.

Today we got to look at these samples in the microprobe, and as expected from the difference in their textures noted while polishing them, they are rather different from one another. The one wherein I had issues with the welding did contain some water; we know this because there are very small grains of mica present. However, neither was it water-saturated, so it lost some due to the poor seal of the capsule. It contains many, many very tiny grains of garnet (~1 micron diameter; remember that there are 1000 microns in every millimeter) which nucleated on their own, and very thin rims of garnet on the “seeds” which had been included in the powder to encourage garnet growth. The rest of the sample is even finer grained “matrix” minerals, which are going to be difficult to analyze. The other, water saturated, sample contains fewer, larger, grains of garnet, and the rims of new garnet growth on the “seeds” are much thicker than in the first sample. While it, too, is generally fine-grained, it will be easier to find single crystals large enough to get a good analysis of their compositions (which we need if we are going to accomplish our goals).

Having had this first look at the samples we’ve set the probe to create “element maps”, pretty full-colour pictures showing which areas are high (warm colours) and which areas are low (cool colours) in specific elements. Once we have these maps, we will use them to select the grains for the detailed compositional analysis. But even before we do that, I now have a better understanding of the difference between water-saturated and water-under saturated environments in terms of the ease at which minerals grow.

Friday, 30 October 2009

Attending AGU in December

While others in the geoblogsphere are still posting about their adventures at GSA in Portland, I’ve just booked my flights for AGU in December. Anyone else planning on attending that one? It would be nice to make it to one of the geoblogger meet-ups instead of reading about them from the far side of the planet…

Thursday, 29 October 2009

Extending the parameters of my “1000 words a day” challenge

Starting in June of 2007 I set myself the goal of reading 1000 words a day from the geologic literature. The reason I chose to do this was the fact that I had a huge pile of papers I needed to read, and hadn’t been making the time to read any of it. Since then there have been numerous days in which I forgot and had to start over. My count has ranged from a low of accomplishing it two days in a row before missing a day to a high of 118 days in a row (my current count is at 42 days, which is the record for the 113 day period since arriving in Europe to commence my first post-doc position). Last night as I was finishing up my evening yoga in preparation for going to sleep I realized that I’d not yet read my 1000. I further realized that my computer and all paper copies of journal articles and textbooks I currently have in my possession were across the street in my office (I love my 2-minute commute to work!). I considered walking back over to do my 1000, but then I thought about the spirit of the rule. The goal was go get me to read a little bit, every day, so that I actually made progress and stayed current with my self-learning.

One of the things I’m doing here, in addition to my experiments, is taking classes in the local language. I’m dutifully doing my homework each day before it is due, but I’ve not been making much additional effort towards actually learning this language. All of my colleagues are so fluent in English that I can speak at my normal high rate of speed, so I don’t *need* to learn the language to do my job. Likewise when at the market it is easy enough to use the phrase I’ve memorized for “half kilo” and point, and then look at the numbers printed on the cash register to work out how much to pay. Again, I don’t *require* the local language to live my life here. Yet, it would be nice.

Therefore, I have expanded my “1000 words a day” to now be either read (at least) 1000 words of geologic literature in my own language, or spend 20 to 30 minutes translating something. One of my favourite books as a child was Anne of Green Gables . I have read, and re-read that book on numerous occasions. I also own copies of it translated into other languages. I purchased the version in the local language soon after I arrived. Prior to last night I’ve only “read” it—by which I mean open the book and look at every word, forming the sounds they make (either in my head or out loud, depending on if another is present), and looking for words which I can understand due to their similarities to the English equivalent. There are just enough of these that I am able to tell where in the story I am based on my memory of the original text. However, while doing this helps me to get a slight feel for the flow of this language, I’m not learning much. Therefore last night I went back to the beginning and actually took the time to write down each word I wasn’t positive I understood, and looked it up in my dictionary. The first two sentences of the story are long and complex and a half an hour elapsed while I looked up the 23 words I didn’t already know. I then read them out loud once straight through, then again phrase by phrase; pausing to state the English equivalent of each before reading the next phrase. It didn’t help me learn new thing in my primary field, but alternating this technique now and again with my normal 1000 a day will help me better fit into this country in which I’ll be living for another year and a bit, and so, I am happy with this change to the “rules” of the game I’m playing with myself.

Wednesday, 28 October 2009

Background learning has meant a reduction in posting

As the weeks slip by in my new job I find that I’ve not been making time to post. I do have a couple of draft posts which are waiting for photos to illustrate them, but they’ve been in a holding state for ages. Somehow the daily press of learning new skills, applying them, attending language lessons 6 hours a week, and doing the homework, combined with a half-hearted attempt to develop a social life in my new country has conspired me to feel as though I can’t spare the time for posting here. However, my log of manner in which I am spending my hours indicates that I have been making plenty of time for personal e-mail and reading the blogs I follow. In theory some of that time could have been spent writing instead of reading.

Ah, writing; it is such an easy way to communicate with people—simply enter the words into a keyboard at a time of your own choosing, and your audience will have the option to read it later, at a time of their choosing. No need to arrange a face-to-face meeting with them to share your information. No need to repeat yourself over and over—one typing session can communicate to hundreds of people, should you wish it to (and, at times, even if you don’t so wish, so it is always best to be careful what you commit to the written form, lest your words be shared in a venue unexpected).

So, what science have I been doing while I was busy not writing (or, in a couple of cases, not taking the photos to accompany the writing)? So far it has been simply learning the mechanics of setting up my experiments. #1 has been run, #2 is in progress, and #3 is approaching ready to go. Next week, I am told, we will look at the results of #1 in the microprobe and see what there is to see. It will be interesting to compare the two samples. My experiments are being run with about 5% H2O and a small piece of graphite sealed into the gold capsules with the powder. When sealing the capsules it is important to do the welding with the capsule bottom surrounded by water to keep it cool so that the welding process doesn’t boil off the water before it is sealed. I failed to do this with the first capsule I filled. Likewise, I am not certain that I actually managed to get the capsule completely welded shut. If there is a small opening in the capsule it is possible for the water to boil out of the capsule early on in the experiment, and so not be available for chemical reactions.

Given the huge difference in texture between the two samples which comprised my first experiments, this may have happened for one of them. Apparently when water is present in the capsules the result is an amount of porosity in between the grains of powder, despite the high pressure of the experiment, so the end product is soft and easily torn out of the capsule after the run, if one isn’t very careful in the polishing process. However, when water isn’t present the grains of powder are pushed more closely together, and the new minerals have a chance to interlock as they grow, resulting in a much more coherent sample. One of my two samples polished up without a tendency for powder to be plucked out of it, so it is likely that this one operated under “dry” or nearly dry conditions. The other required much more care as it was soft. It was necessary to coat it with additional epoxy before the final polish to keep it from being lost. It will be interesting to compare the results of the two samples. Are there any hydrous minerals at all in the one we suspect was “dry”? I will have to wait till early next week to learn the answer to this question.